Belkin F5D8055tt User Manual
Page 42
40
table of contents
1
2
3
4
6
5
N+ Wireless USB Adapter
section
TroUBleSHooTING
The name of your wireless network appears in “Available Networks” .
If the correct network name is listed in the “Available Networks” list,
please follow the steps below to connect wirelessly.
1. Click on the correct network name in the “Available Networks” list.
2. If the network has security (encryption) enabled, you must enter
the network key. Click “Connect”. For more information regarding
security, see the page entitled: “Securing your Wi-Fi Network” on
page xx of this User Manual.
3. Within a few seconds, the tray icon in the lower right-hand corner of
your screen should turn green, indicating a successful connection to
the network.
If you are still unable to access the Internet after connecting to the
wireless network, please contact Belkin Technical Support.
The name of your wireless network doeS NoT appear in the list
of “Available Networks” .
If the correct network name is not listed, check the SSID settings to
see if they match. The SSID is case-sensitive and the spelling on each
computer must be exactly the same in order for the Adapter to connect
to the wireless router (or access point).
Note: To check the SSID settings or look for an available network,
double-click the Signal Indicator icon to bring up the “Wireless
Networks” screen. Click “Add” if you do not see the network you are
trying to connect to and type in the SSID. For more information about
setting up an SSID, please reference your router manufacturer’s user
manual.
If issues persist even at close range, please contact Belkin Technical
Support.