Em-120sm — maintenance – Multiquip EM120SM User Manual

Page 19

ESSICK EM-120SM — OPERATION AND PARTS MANUAL — REV. #5 (03/29/10) — PAGE 19

EM-120SM — MAINTENANCE

NOTE

Any questions regarding the above procedure please
contact the Multiquip Service Dept. at 1-800 421-1244.

C. When the clutch has been satisfactorly adjusted reinstall

the

adjustment lock

P/N EM 934040 and tighten lock bolt.

D. Reinstall the

clutch Inspection door

using the six 1/2-

inch capscrews and lockwashers, and also check that the
gasket is not worn or broken.

E. When the clutch has been satisfactorly adjusted reinstall

the

adjustment lock

P/N EM 934040 and tighten lock bolt.

F. Remove the 3/8-inch square head pipe plug located on

the lower clutch compartment. Refill the clutch
compartment with 1.5 liters of SAE 30 motor oil to the level
of the plug. When done reinstall plug.

G. Reinstall spark plug wire or electric power cord. Start

engine, check for proper clutch engagement and inspect
for any oil leaks.