Multiquip R2000H - Manual (Page 29)

R2000H RIDE-ON STATIC ROLLER — OPERATION AND PARTS MANUAL — REV. #6 (11/29/10) — PAGE 29
R2000H — PREPARATION FOR LONG -TERM STORAGE
Roller Storage
For storage of the roller for over 30 days, the following is
recommended:
 Drain the fuel tank completely, or add STA-BIL to the
fuel.
 Run the engine until the fuel in the injection system is
completely consumed.
 Completely drain used oil from the engine crankcase
and fill with fresh clean oil, then follow the procedures
described in the engine manual for engine storage.
 Drain water tank
 Clean the entire roller and engine compartment.
 Remove battery and store it in cool dry place.
 Cover the roller and place it a clean dry area, that is
protected from harsh elements.
 Remove ignition key, and store in a safe place.