0 control system, Operation, 1 pre-commissioning checks – Multiquip P54K-K2B-K4B User Manual

Page 24

P54
K/K2B/K4B

Operation :

5.0 Control System

5.1 Pre-commissioning checks :

Before commissioning every day or prior to an extended work period, carry out the checks listed below.

Danger :

Observe the safety stipulations in Section 3.0 of these operating and maintenance
instructions

• Set the machine down on an even, load-bearing surface.

Check :

• All screw joints for a firm fit

• Function of the travel pedal

• Fuel tank and lines for leaks

• Steering function

• Machine and engine for damage

• Hydraulic system for leaks

Fig. 10

Check hydraulic oil level and top up if necessary

Check soiling of the air filter

Fig. 11

Fig. 13

Fig. 12

Check fuel supply and top up if necessary

Filling opening for diesel fuel

ЦSA