Multiquip P54K-K2B-K4B - Manual (Page 20)

18 P54
K/K2B/K4B
Safety remarks :
3.11.3 Work at the engine:
Drain off the engine oil at operating temperature – Danger of scalding!
Wipe away any spilt oil, collect emerging oil and dispose of in an environmentally responsible manner.
Keep used filters and other oil-soiled materials in a separate, specially marked container and dispose of in
an environmentally responsible manner.
3.11.4 Work on the electrical system :
• Before performing work on the electrical system, disconnect the battery and cover with isolating
material.
• Do not use fuses with a higher amperage or repair fuses. Fire hazard!
3.11.5 Work on the battery :
• When carrying out work at the battery, never smoke or expose to a naked flame.
• Do not allow acid to contact hands or clothing. In case of injury due to acid spillage, rinse with clear
water and consult a doctor.
• Never place any tools on the battery.
• Dispose of old batteries in compliance with regulations.
3.11.6 Work at the fuel system :
No naked flames, no smoking, do not spill fuel.
Collect emerging fuel, do not allow to seep into the ground and dispose of in an environmentally friendly
manner.
3.11.7 Cleaning work :
• Never carry out cleaning work with the engine running.
• Never use petrol or other easily flammable materials for cleaning.
• When cleaning using a steam jet cleaning device, cover all electrical parts and the insulating material
or do not expose to direct water or steam jet.
• Do not hold the cleaning jet in the sound absorber.
3.11.8 After completing maintenance work :
- All protective devices must be replaced after cleaning and maintenance work.
- Carry out performance checks.
3.12 Repairs :
If the machine is defective, hang a warning sign on the machine.
Repairs may only be performed by qualified and specially commissioned personnel.
Exhaust gas is lethal! When starting the engine in enclosed areas, ensure that sufficient ventilation is
provided!