MotorGuide Digital Remote DRC - Manual (Page 9)

8
M887655
TROUBLESHOOTING – Frequently Asked
Questions
The receiver beeps when I press a button
on the remote but nothing happens. The
receiver does not have the remotes serial
number programmed; refer to “Programming
the Serial Number”.
Programming the serial number doesn’t
work.
The receiver’s memory might be full, see
“Erasing Memory” then try programming the
serial number again. Also, the serial number
must be programmed within ten seconds of
powering-up the motor.
When I am standing at the back of the
boat and I press a button on the remote,
the receiver does not beep.
Move the receiver away from potentially
interfering devices and experiment with
orienting the receiver in different directions