MotorGuide Digital Remote DRC User Manual
Page 8
7
M887655
beep sounds. The motor will then steer back
to the center position.
2. Erase Memory - to erase all serial numbers
stored in the receiver’s memory:
Power-up the motor
Within 10 seconds, press and hold all
four outer buttons on the remote
Listen for a long low pitch beep
indicating the receiver has erased all
stored serial numbers.
FOR REPAIR SERVICE
Contact your nearest MotorGuide Service Dealer. See a
complete listing of Service Dealers in the US and Canada at
our MotorGuide web site:
www.motorguide.com
.
Call Mercury Marine Consumer Affairs to obtain the name
and location of the Service Dealer nearest you.
United
States:
1-920-929-5040