MMF POS USB with Statistics Interface Kit - Manual (Page 3)

USB Interface /USB-HUB Combo Interface Instruction manual / User Guide
Approved Date of Revision 7/10/2012 Doc. Instruction Manual
P/N: 531911900
MMF OPOS DRIVER V1.13 INSTALLATION
STEP 1
Install MMF OPOS Driver V1.13, available under: http://www.mmfcashdrawer.com/08/driver_downloads.html
The user installing the MMO POS software and configuring the cash drawer devices on Windows 2000, Windows XP, and
Windows 7 is required to have Administrator Rights. Once the software is installed, all users with normal rights can use it.
STEP 2
FIGURE 1.2
If using CD, open the file named MMF OPOS 1.13
To install the driver run the file: Setup.exe.
The program will ask you to unzip, click Unzip.
» After download is completed, go to “Start” Menu
» Go to “All Programs”
» Select the “MMF Cash Drawer” program
» Select the “Configure and Test” program
STEP 3
Open the “Configure and Test”
program and click on “Configure Device”. (See Figure 1.2)
STEP 4
To configure drawer - click on “Add new drawer”. A window will appear
asking you to enter a name for your cash drawer, name it
Cash_Drawer#1 (See NOTE). Select the option of “USB Interface
with Statistics” as the Cash Drawer Interface (See Figure 1.3) and click
“OK” to save settings.
NOTE: The name Cash_Drawer#1 is case and character
sensitive. Please type it exactly as shown
FIGURE 1.3
NOTE: NOTE: The name
Cash_Drawer#1 is case and
character sensitive.