MK Diamond SDG-7 - Manual (Page 14)

14
MK-SDG-7 OPERATION
OPERATION
BEFORE STARTING
1. Inspect area before grinding. Remove all debris that could damage diamond cup wheel or cause a
hazardous situation.
2. Choose correct diamond wheel for the job condition.
3. Ensure grinding wheel mounting is clean and the retaining bolt is securely tightened.
4. Be sure the grinding wheel is positioned over the work area.
Tilt the grinder up from the
floor.
Check the shroud and cup
wheel are free of obstruction.
Plug in grinder to suitable
power source.
When grinding is completed,
tilt grinder back and switch
to OFF.
Start the motor and lower
grinder to start grinding.
Attach the hose from a
vacuum to the vacuum outlet
port. Turn on vacuum.