MK Diamond SDG-7 - Manual (Page 11)

11
DANGER
Do NOT use in
wet conditions
!
Most Motor Problems are caused by improper
voltage and extension cords. Cord should be
one-piece and short as possible. Cord
selection should match the following table.
1-2 H.P.
25’
50’
75’
100’
150’
250’
Max. Cord Lgth.
Max. Cord Lgth.
Max. Cord Lgth.
Max. Cord Lgth.
No. 12 Wire
No. 10 Wire
No. 8 Wire
No. 6 Wire
120v 230v
5 H.P.
230v
50’
100’
150’
250’
NOTICE !
CAUTION
Keep
hands and
feet clear.
!
WARNING
Grinding/cutting/drilling of masonry, concrete, metal and other materials with silica in
their composition may give off dust or mists containing crystalline silica. Silica is a basic
component of sand, quartz, brick clay, granite and numerous other minerals and rocks.
Repeated and/or substantial inhalation of airborne crystalline silica can cause serious
or fatal respiratory diseases, including silicosis. In addition,California and some other
authorities have listed respirable crystalline silica as a substance known to cause cancer.
!
DO NOT operate
this equipment
before reading
the owner’s
manual!
WARNING !
The MK-SDG-7 is equipped with a number of safety decals provided for operator safety and mainte-
nance information. Should any of these decals become unreadable, replacements can be obtained by
calling (800) 421-5830.
MK-SDG-7 Safety Decal Sheet, Part No. 168145
OPERATION & SAFETY DECALS
Decal A
MK-SDG-7 SAFETY
SAFETY DECAL LOCATIONS
Decal Location Description
A IXL Shroud Warning - Silica
B Starter Switch Notice - Cord
C Starter Switch Warning - Read Owner's Manual
D Weight Caution - Keep Hands clear
E Starter Switch Danger - Wet Conditions
F Starter Switch QR Code
MK-SDG-7 Safety Decal Locations
Decal D
Decal E
Decal F
Decal B
Decal C
Decal A
Decal B
Decal C Decal D
Decal E Decal F
For manuals and parts
lists scan the QR code
with your smart phone