MK Diamond MK-3000 Series - Manual (Page 18)

18
MK-3000 SERIES PRODUCT SPECIFICATIONS
BLADE GUARD
CAPACITY
20” 26” 30”
(508 mm) (610 mm) (760 mm)
BLADESHAFT RPM 1,900
MAXIMUM
DEPTH OF CUT
7-1/2” 10-1/2” 12-1/2”
ARBOR SIzE
1” (25.4 mm) with 3/8” drive pin, blade can be mounted on either
side of shaft
BLADE SHAFT 1-7/16” (36.5 mm) diameter
BLADE SHAFT
BEARING
Dual Row 1-7/16” Pillow Block Roller Bearings
BLADE SHAFT
DRIVE
7 Rib Powerband, optimized for correct blade shaft RPM at peak
engine power
BLADE CONTROL Electric leadscrew for positive adjustment of cutting depth
BLADE COOLANT Blade guard uses “ride on the blade” water tubes for superior water
delivery and blade cooling
AXLES
FRONT
REAR
1” (25.4 mm) diameter
1” (25.4 mm) diameter
WHEELS FRONT
REAR
Front Wheel 6” x 2-1/2” wide rubber with 1” ball bearings with lubrica-
tion fittings.
Rear Wheel 8” x 2-1/2” wide solid rubber
TRANSMISSION
Hydrostatic Transmission with freewheel neutral control. Travel
speed 0-220 FPM Forwards, 0-100 FPM Reverse. FNR Handle con-
trols forward/neutral/reverse. Neutral safety start switch.
CHASSIS
Heavy-duty rigid box and rib main frame construction.
Removable Service Panels for ease of maintenance.
CONSOLE
Console with Tachometer/Hour Meter, Fuel Level Gauge, indicator
for Oil Pressure and Keyed Start Switch
POINTER Adjustable front and rear pointers
HANDLE BARS Three positions
STANDARD SAW SPECIFICATIONS