MK Diamond MK-3000 Series - Manual (Page 10)

10
Never try to stop a moving blade with your hands.
DO NOT cut dry with blades marked "WET".
DO NOT make long continuous cuts with a dry diamond blade. Allow the blade to cool be-
tween cuts by freewheeling. Harder materials will cause the blade to heat more quickly.
Let the blade reach full speed before commencing the cut.
If the blade makes an unfamiliar noise or vibrate excessively, switch the saw of immediately
and disconnect it from the power source. Investigate the cause and remedy the problem
before restarting the saw.
ON
( (
)
)
ON
( (
)
)
ON
( (
)
)
ON
( (
)
)
ON
( (
)
)
MK-3000 SERIES SAFETY