MK Diamond MK-112 - Manual (Page 21)

21
MAINTENANCE AND TROUBLESHOOTING
TROUBLESHOOTING
HAVE YOUR TOOL REPAIRED BY A QUALIFIED PERSON
This electric tool complies with the relevant safety rules. Repairs should only be carried out by qualified persons
using original spare parts, otherwise this may result in considerable danger to the user.
PROBLEM CAUSE SOLUTION
The machine does not work. The power supply cable is
damaged or not properly
connected.
No voltage in the socket.
Control switch is damaged.
Press the plug firmly into the power
socket. Check the power supply
cable.
Have the socket checked.
Consult local dealer for
replacement
If water does not flow at the blade
with the pump running.
The sprayer unit is clogged. Dismantle the sprayer assembled
inside the blade and remove any
possible residuals.
Motor gives off unpleasant odor. Water may have seeped through
inside the motor.
Unplug the power supply cable and
consult local dealer.
Capacitor is damaged Unplug the power supply cable and
consult local dealer.
Machine is difficult to start. Motor bearings are damaged. Unplug the power supply cable and
consult local dealer.