MK Diamond MK-112 - Manual (Page 14)

14
Follow the assembly instructions to prepare your MK-112 for operation.
1. Checking before use:
THE MK-112 TILE SAW IS DESIGNED TO WORK WITH WATER
Before any cutting operation, make sure that the water level inside the water pan reaches the pump.
ADJUSTMENT OF COOLING WATER
Through an on-off valve placed on the disk protection (SEE PICTURE 5) it is possible to adjust the water flow
according to the type of material to be cut. An innovative cooling system makes it possible and allows the blade
to be always wet.
SETUP:
SETUP, ADJUSTMENT & OPERATION
PICTURE 4
Water
level
PICTURE 5
CAUTION
CAUTION