MEElectronics Air-Fi Matrix AF62 - Manual (Page 13)

10
Note: The Windows 7 operating system does not have built-in Bluetooth drivers;
drivers are provided by the Bluetooth transmitter manufacturer. Actual pairing
and connecting process can vary depending on the Bluetooth device drivers and
computer configuration.
Pairing (Continued)
Windows 7 Computers and Laptops
Press on the Bluetooth icon in the notification area of your
taskbar and select Add a Device
The Add a device popup window will appear with
“Select a device to add to this computer”
Make sure the Matrix is off and within 1 meter of your device
Initiate pairing mode by pressing the Power/Call button for 6
seconds, until you hear “ready to pair.”
(Note: the first time you use your Matrix it will automatically enter
pairing mode when powered on.)
The Matrix will offer voice prompts to assist in pairing in a
repeating cycle until it is either connected or powered off.
(Note: Pairing mode will be active for 5 minutes. If no devices are
paired within that time, the Matrix will return to standby mode.)
Wait until you see either “AF62” or “Bluetooth headset” in the
Searching for devices area
Select “AF62” or “Bluetooth headset” and press the Next button;
the Add a device popup will display “Connecting with this device”
When the computer is finished pairing with the Matrix headset,
the Add a device popup will display “This device has been
successfully added to your computer”
On some computers, it can take a few minutes for the device
driver software to install completely, and a “Your device is ready
to use” notification will appear in the notification area; other
computers will not show this notification
If pairing is successful, continue to the next page.
If pairing fails, please repeat steps a) through h) above.
a)
b)
c)
d)
e)
f)
g)
h)