MEElectronics Air-Fi Matrix AF62 - Manual (Page 12)

09
Pairing (Continued)
Android Phones and Tablets
On your Android phone or tablet, navigate to the Settings menu
Select Wireless & Networks
Make sure the Matrix is off and within 1 meter of your device
Make sure Bluetooth is enabled on your device
Initiate pairing mode by pressing the Power/Call button for 6
seconds, until you hear “ready to pair.”
(Note: The first time you use your Matrix it will automatically
enter pairing mode when powered on.)
The Matrix will offer voice prompts to assist in pairing in a
repeating cycle until it is either connected or powered off.
(Note: Pairing mode will be active for 5 minutes. If no devices are
paired within that time, the Matrix will return to standby mode.)
Select Bluetooth Settings
“AF62” should appear under devices; If it is not automatically
found, select Scan for devices. Once it has been found, select
“AF62” in the list of Bluetooth devices to pair and connect
The Matrix will say “pairing completed” once pairing is complete.
“AF62” should show “connected” on your device; the blue LED
will be on continuously when connected
If pairing fails, please repeat steps c) through h) above
a)
b)
c)
d)
e)
f)
g)
h)