Mayline Security Shade - Manual (Page 8)

6. Tightly roll door back up, place a
piece of tape to hold door in tightly
rolled posistion. Re-assemble door and
idler roller onto bracket assemblies.
(Fig. 6A)
7. Place assembled door back into the
metal housing. (Fig. 7A)
8. Rotate door one complete
revolution. (Fig. 8A)
9. Hold door firmly and remove the
tape on the door. Pull tambour door
over idler roller and down through the
opening in the metal housing.
Continue to hold door firmly and
re-install the slam rail. (Fig. 9A)
10. Re-install metal housing top using
the (6) screws that were removed in
step 1. Set metal housing back on top
of unit and test door operation.