Mayline Security Shade - Manual (Page 2)

The Tambour Door is 36", 42" and 48" wide. All Kwik-file 4-Post units are 5/16" wider than
tambour door and requires the door tracks to be placed 5/32" from the outer edges. Mark this
distance at various places along each side upright of the Kwik-file 4-Post unit.
NOTE: If you are installing this door on a unit that measures 36", 42" or 48" wide, align the
Inner Track with the outer edge of that unit.
NOTE: The Track should extend above the unit about 1/4" to 2-3/8". If the track extends
beyond the 2-3/8" MAXIMUM , both the outer and inner track must be cut back.
Remove the protective covering from the tape on the back side of the Inner Track. Position the
bottom of the Inner Track flush with the bottom of the 4-Post upright. Align the Inner Track with
the marks you made or flush with the edge as noted in Step 1. Press track firmly in place.
Secure each Inner Track to the 4-Post Upright with (5) #10-16x1/2" silver Self-tapping Screws
equally spaced along the length of the track.
File or cut the top inner edge of BOTH Outer Tracks at 45°, which will allow the Tamb our Door
to travel more freely.
Snap the Outer Tracks into the mounted Inner Tracks.
Mount the Bottom Lock Rail with (2) #10-16x1/2" black Self-tapping screws to the bottom of the
tracks. If product is being mounted on Kwik Track, Mobile Lite or Mobile Aisle moveable
product, please see page 5.
6.
4.
5.
3.
2.
1.