Back / center panel, Assembly instructions (optional item) – Mayline Four Post Shelving User Manual
Page 6

5 & 6. SHELVES: Two styles are used:
A.) Single Face Slotted
Depth is 18". Two rows of slots exist for
divider installation. Three slots are also
located in the back of the shelf for the
center/back stop installation.
B.) Double Face Slotted
Depth is 36". Four rows of slots exist for the
divider installation. Three slots are also
located in the middle of the shelf for the
center/back stop installation.
C.) Single & Double Face Non-slotted
Shelves are positioned on the shelf supports
and also used as the canopy top, which is
typically a non-slotted shelf.
7. COMMON STOPS:
Placed in the back of single face and middle
of double face shelves. Held in place by
dividers.
Back / Center Panel
Assembly Instructions
(Optional Item)
Back Panel (indicated by offsets running
the long length of the panel) & Center
Panel (no offsets) installation
Rest the panel flange on the top of the
4-Post assembly and center the panel
side to side. Peal away protective film
from tape on inside of panel and firmly
press into position.
Optional: Attach the panel using (4) #10
TEK self-drilling screws located at the
top flange into top shelf and along the
bottom into the bottom shelf (hardware
bag of 30 screws is provided). A power
driver must be used to thread the
screws into the uprights. Verify with end
user if they would like the screws
installed into the panel.