Connect the airstation to your existing lan – Buffalo Technology WLA2-G54 User Manual

Page 6

This completes the basic

AirStation Configuration. To change advanced settings

consult the User Manual located on the Utility CD or the Buffalo Support Web Site:

http://www.buffalotech.com/wireless/support.

Connect the AirStation to your existing LAN

Once configuration is complete, connect the AirStation to your existing Local Area

Network. Plug the provided 7ft. Ethernet cable into the 10/100M Ethernet port on

the

AirStation 54Mbps Compact Repeater Bridge and plug the other end

into an Ethernet hub or switch on your Local Area Network.

MAC Address for WDS Mode

The

Wireless MAC address is a 12-

digit code comprised of numbers and let-
ters and is located on the rear of the
AirStation.

The

Wireless MAC Address is used for

WDS functionality.

Once the

AirStation is connected to the existing LAN, users accessing the

LAN through the

AirStation must configure the computer’s TCP/IP Settings to

match your existing LAN.
Contact your network administrator if your computer requires a static IP
Address or if using DHCP Services.