Lowell 30RK User Manual
30rk installation sheet

REMOVABLE
PHOENI X
CONNECTOR
Instruction Sheet
P/N: 20146
Issued: 9-10-14
Lowell Manufacturing Company
100 Integram Drive
Pacific, Missouri 63069 U.S.A.
Call: 800-325-9660
Fax: 636-257-6606
Click: www.lowellmfg.com
30RK
INSTALLATION SHEET
The 30RK rack mounting kit allows the installer to mount the
Lowell MA30 mixer/amplifier in a standard 19" equipment rack.
1
2
3
4
Step 2
2
Remove the two (2) chassis cover screws as shown in figure .
Also remove the same two (2) cover screws on the opposite side
of the chassis.
Screw Note:
The chassis screws that you removed, have a unique metric size
and thread pitch. Discard those screws. Provided with the kit are
8-32 self-tapping and 6-32 self-tapping screws that will use the
existing metric threaded holes as starter holes and will thread
new tapped holes that will securely attach the mounting brackets.
Step 3
3
The smaller bracket can be mounted on either side of the MA30
as desired. In this example, we will mount the small bracket to
the left side of the MA30. Line up the small bracket with the holes
in the MA30 and securely tighten the two (2) 8-32 self-tapping
screws and the two (2) 6-32 self-tapping screws where shown in
figure .
Step 4
4
Line up the large bracket with the holes on the opposite side of
the MA30 and securely tighten the two (2) 8-32 self-tapping
screws and two (2) 6-32 self-tapping screws. The completed
assembly with the rack mount brackets installed is shown in
figure .
Step 5
Finally, mount the MA30 mixer/amplifier in a 19" equipment rack,
using standard 10-32 Phillips-head machine screws (like the
Lowell model RS or RSP rack screws) with integral plastic
washers to protect the finish on the front of the mounting brackets.
Rack mounting screws are not included with the 30RK kit.
Step 1
The 30RK rack mounting kit includes one (1) small bracket, one
(1) large bracket, four (4) 8-32 self-tapping screws, and four (4)
6-32 self-tapping screws as shown in figure .
1
8-32 black self-tapping screws
6-32 black self-tapping screws
Remove
Remove