Love The Drive Chrysler 200 Convertible Wind Deflector 2011 to 2014 - Manual (Page 5)

Then slide the locking bolt down, tighten
the bottom screws and replace the top
screws into the two top holes.
Before storing your wind deflector in the trunk
you will need to lower the locking bolt. Remove
the top two thumb screws and then loosen, but
don't remove the bottom two thumb screws.
Always store the wind deflector in the
storage bag. This photo is only to show
that it fits in the trunk with the top
down.
Your wind deflector will fit in the trunk when not is
use. Start by folding it up. Then place the locking
bolt side in first.
If you have any questions or comments please
call 1-855-457-5683 or email [email protected]
www.lovethedrive.com