Love The Drive Chrysler 200 Convertible Wind Deflector 2011 to 2014 - Manual (Page 2)

Place one hand on the bottom of the front panel
and one hand on the bottom of the back panel.
Unfold the bottom panel out towards the rear
seat. The wind deflector will bend in the middle
and lay flat.
The rear bracket will enter into the holes on
each side of the rear trim panel.
The rear brackets will slide into the holes and the
wind deflector will lay flat. The installation is now
complete and you can now lift up the top panel.
To remove the wind deflector place one hand
on each side of the front panel. Note the back
hand is not in the same spot as for installation.
Now just lift up on the rear of the front panel
and the rear brackets will slide out. Unlock the
locking bolt on the side closest to you and lift the
wind deflector out.