Love The Drive BMW Windstop 1 Series (E88) 128i, 135i 2007 to 2013 - Manual

Start by lowering your top and moving the front seats all the way forward.
Start by extending both barrel bolts on one end
of the wind deflector. Turn the handles so they
will face down, when in the car. This locks the
bolts into place. These bolts will slide into the
holes on the opposite side of the car from which
you are standing.
We have our video install guides on
our website and on youtube.com Also
feel free to call or email us if you
have any questions 1-855-457-5683
[email protected]
Your BMW 1 is designed to be fitted with a
wind deflector. There are two holes on
each side of the rear trim panel. The front
and rear barrel bolts fit into these holes.
* You can raise and lower your convertible top with the wind deflector installed.
* The wind deflector will fit in the trunk when not in use.