Longevity MIGWELD 140 - Manual (Page 11)

MigWeld 140 140 AMP MIG Welder
Page 11 of 27
Operation Manual
Carefully read the operation manual prior to using, installing and maintaining
the electric welding machine for the purpose of preventing damages such as fire,
electric shock and etc from occurring. Please keep the manual for the reference
in the future.
Specifications and Parameters
Rated input 115VAC, 60 hertz, 20 amps
Maximum output open-circuit voltage 28 volts DC
Rated output 90 AMPS@18volts 20%duty cycle
Wire feed rate 59 to 393 in/min (1.5-10.0m/min)
Specifications of applicable welding wire
.025”-.030” (0.6-0.8mm) solid steel
.030”-.035” (0.8-0.9mm) Flux-Cored
Welding Wire Spool
8”x2” (200mmx50mm)
4”x5/8” (100mmx16mm)
Weight 54 lb (24.5 kg)
Dimensions (Length*Width*Height)
16”x9.6”x14.5” (408x244x367)
NOTE: DUTY CYCLE is welding equipment specification, which defines the
number of minutes, within a given time interval, during which a given welding
machine can safely produce a particular welding current. It is usually expressed
as a ratio of the uninterrupted no-load duration to the total time (usually 10
minutes)