Lenze 8250 series Brake unit - Manual (Page 10)

Preface and general information
8250BA0903 1-3
1.3.2 Application as directed
8251 brake modules
• Additional units for Lenze controllers:
- 820X frequency inverters (8201 to 8204)
8252 brake modules and 8253 brake choppers
• Additional units for Lenze controllers:
- 821X frequency inverters (8211 to 8218)
825X brake units
• Operate the brake units only under the conditions
prescribed in these Operating Instructions.
• They are components
- for installation in a machine
- for assembly with other components to form a machine.
• They are electrical equipment for installation into control
cabinets or similar closed operating rooms.
• They meet the protection requirements of the EC Low-
Voltage Directive.
• They are not machinery in the sense of the EC Machinery
Directive.
• They are not household appliances but are intended
exclusively as components for further commercial use.
Drive systems with 825X brake units
• They correspond to the EC Electromagnetic Compatibility
Directive if they are installed according to the guidelines of
CE-typical drive systems.
• They can be operated
- on public and non-public mains.
- in industrial as well as residential and commercial
premises.
• The compliance with the EC Directives in machine
application is in the responsibility of the user.
Any other use shall be deemed inappropriate!
Show/Hide Bookmarks