Lenze EEPM1RA EPM - Manual (Page 18)

ENGLISH
Operation
4.11 Create a new file
With this function you create a new parameter file in the EPM programmer. Data for your new file can be copied from the
following sources:
• Parameter files available on the EPM programmer.
• Parameter file from an EPM mounted in the MASTER PORT.
Press The display shows... Explanation
.
MENU
CREATE NEW FILE Press the key until the menu appears in the display.
.
ENTER
ENTER FILE NAME This request is briefly shown in the display
NAME:=_ _ _ _ _ _ _ The cursor is positioned under the first character
of the file name.
A file name can consist of 8 characters maximum.
. NAME:A_ _ _ _ _ _ _ Use the buttons to select a value. To scroll
quickly to a value, keep the key pressed. The scroll
rate increases as you hold the button.
.
ENTER
NAME: A=_ _ _ _ _ _ The cursor is positioned under the next character
of the file name.
. NAME: ABC=_ _ _ _ Repeat step 3. until the desired name is entered.
.
ENTER
NAME: ABC_ _ _ _ =
COPY DATA FROM..
Press ENTER until the cursor is positioned on the
eighth character position. If you re-press ENTER,
the file name is stored.
Press MENU at any time to abort the file creation
and return to the main menu.
. 1) FIL E The cursor is blinking in the display on the right.
Select a source (e.g FILE) whose parameters you
want to copy into your new file:
1) FILE
2) MASTER
.
ENTER
SELECT FILE (this message is not displayed when selecting
MASTER and steps 8 and 9 are skipped)
>#DEFAULTS(400 ) < The cursor is blinking in the display on the right.
. >#ABC_ _ _ _ _(400 ) < Select a parameter file you want to copy
(e.g. ABC_ _ _ _ _). Press the MENU key, if you
want to abort this proceedure.
0.
ENTER
TRANSFERRING 100% The new file has been created.
FILE CREATED!
CREATE NEW FILE The EPM programmer automatically returns to the
main menu.