Siemens Euroset 5020 - Manual (Page 7)

euroset 5020 / IM eng-fra-russ-kro / A30350-M209-A801-2-UP19 / 5020.fm / 24.07.2006
7
GB
Deleting entries in the calls list
Delete all entries at the same time
A / C Press the Down/Up key.
?*? Press the Set key, star key and Set key one after
another.
The calls list is deleted and closed.
Delete individual entries
A ... C Scroll to the desired entry.
?? Press the Set key twice.
The entry is deleted.
Activating/deactivating display of the area code
You can set the telephone so that the area code is not dis-
played for incoming calls. This can be useful, for example, if
you cannot see the last digits of a long phone number on
the display.
You can deactivate the display for 2 area codes (up to
5 digits each).
?4 Initiate function.
If no number has been set in a storage location
z appears in the display.
If both storage locations are in use, these are
displayed side by side; the current storage
location to be edited flashes. If necessary, use
the ; key to toggle between the storage
locations displayed to edit them as follows:
Delete a number:
? Press the Set key.
Enter a number:
o Enter a one to five digit number.
Enter another prefix:
; o Press the last number redial key, enter next
prefix.
? Press the Set key.
"You have a message" display
Different network providers offer services for saving
messages (e.g. voice mail services).
If one or more newly received messages have been stored
with the network provider, it may inform you via your tele-
phone. In the display, this notification from the network
provider is displayed with the flashing † symbol and the
phone number.
You can now dial the corresponding phone number in order
to check the stored messages. If there are no more new
messages for you, the † symbol disappears.
Using the repertory keys as "function keys"
Different public telephone services/functions – possibly by
order/request – can be selected via predetermined key com-
binations which you can obtain from your network provider.
You can save the necessary key combinations like normal
phone numbers on repertory keys and similarly "select" and
also deactivate the service again.
Note:
If you activate the symbol display and save the function calls
on the 2nd level of the repertory keys, you can link the
activation and deactivation of different services for each
"function key" with the display or hiding of certain symbols
on the display.
Therefore, when setting the repertory keys on the 2nd
level, bear in mind that activating and deactivating the dis-
play symbols ™ , ˜ , — , ë and š is linked to very specific
keys in the 2nd level – regardless of the phone numbers or
function calls stored on it!
Deactivating/activating the symbol display for additional
services
Displaying the symbols can be activated or deactivated as
needed. In the default setting, the display is activated.
?145
Initiate function.
0 / 1 0: deactivate; 1: activate.
? Press the Set key.
Recommended assignment of symbols to keys
When the symbol display
= is activated and you then
press one of the following repertory keys, the display sym-
bol assigned to each is activated or deactivated respectively
(key numbering from top to bottom):
= + Assignment Display
icon
: 1
Call forwarding immediately
on ™
: 2 off
: 3
Call forwarding on no reply
on ˜
: 4 off
: 5
Call forwarding when busy
on —
: 6 off
: 7
Call waiting
on ë
: 8 off
: 9 Anonymous call (only the next call) š