Labnet FastPette Pro - Ultimate Pipette Controller User Manual
Page 10

7
WARNING!
If disposable batteries are used, it is unacceptable to connect the device to the charger.
In order to prolong the life span of the rechargeable batteries, the following rules should be
followed:
1. Before the pipette controller is activated for the first time, the batteries should be
charged.
2. FASTPETTE PRO should not be left uncharged for a longer period of time.
3. In the case of a planned longer break in the work of the pipette controller, it is recommended
to take the batteries out of the pipette controller.
9 - MAINTENANCE
Cleaning
The FASTPETTE PRO does not require any maintenance. The external parts of the pipetting
aid may be cleaned with a swab moistened with isopropyl alcohol.
The nosepiece and the pipette holder may be autoclaved at 121 °C for 20 mi nutes. After auto-
claving, dry the pipette holder. The filter included in the set may be sterilised by autoclaving
at 121°C for not more than 15 minutes.
Storage
The FASTPETTE PRO shall be stored in a dry place. The allowable storage temperature: -20 °C
to +50 °C.
During breaks in the work the pipette controller shall be placed on a charging stand in hori-
zontal position (fig. 7A) or in vertical position (fig. 7B). The charging stand may be fitted on
a wall (fig. 7B) with a fixing set included with the pipette controller.
CAUTION:
Do not store the pipetting aid with a pipette contoller.
10 - COMPONENTS
The FASTPETTE PRO set is supplied with the following components:
• Pipette controller
• Charger
• Charging stand
• Membranefilter 0.2 μm
• Battery – 3 pcs.
• Instruction manual
FASTPETTE PRO INSTRUKCJA (474P.) Nr rys. 015.9001.00.07_FASTPETTE PRO INSTRUKCJA (474P.) 11-11-30 16:58