Bosch WFL 2090 - Manual (Page 28)

28
Dimensions
a = 600 mm // 23 5 /
8
"
b = 590 mm // 22 1 /
2
"
c = 852 mm // 33 1 /
2
"
Approx. weight = 69 kg // 152 lbs.
Installation area
d WARNING d
Never ground the washer to plastic plumbing
lines, gas lines or hot water pipes.
Appliance stability is important to make sure the
washing machine does not walk" during the spin
cycles.
The installation area must be solid and even. Soft
floor surfaces, such as carpets or surfaces with
foam backing, are not suitable.
If the washing machine is to be installed on a
wooden floor:
q If possible, place the washing machine in a
corner of the room.
q Screw a waterĆresistant wooden board (at least
30 mm thick) to the floor.
q Secure the feet of the washing machine using
holding brackets *.
If the washing machine is to be placed on a
pedestal:
q Secure the feet of the washing machine using
holding brackets *.
* Holding brackets (set) can be obtained
from the Customer Service (order no.
WMZ 2200).
d WARNING d
To reduce the risk of fire this washer must be
fastened or otherwise secured to an uncovered
concrete floor.
Pedestal Mounting
For mounting the washer on the Bosch 12"
pedestal (accessory No. WTZ 1210) follow the
instructions supplied with the pedestal.