Bosch WFL 2090 - Manual (Page 24)

24
Troubleshooting of Minor Faults
d WARNING d
Avoid risk of electric shock!
Repairs must only be carried out by our
Customer Service or an authorized technician.
If repairs are necessary, and you cannot eliminate
the fault yourself with the aid of the following table:
q Turn the program selector to Off.
q Disconnect the washing machine from the
power supply.
q Turn off the water tap.
q Call Customer Service (refer to Page 23).
Fault Possible cause Action
The loading door cannot be
opened. no final spin was selected. Select Drain or Spin. The loading door cannot be
opened.
Safety function is active. Wait for 2 minutes.
Detergent residue in the detergent
dispenser. Detergent was damp or lumpy. Clean and dry the detergent dispenser
(refer to Page 19).
Control lights do not come on. A fuse has tripped. Use the dispensing aid for liquid detergent.
Call Customer Service / reset the fuse.
Power failure. An interrupted program will be resumed when
power returns. If you wish to unload the
laundry, proceed as in Cleaning the drain
pump", Page 20.
Plug is loose or not inserted. Insert the plug.
Program does not start.
The ready control light flashes. Loading door not closed. Check whether laundry is trapped in door. Program does not start.
The ready control light flashes. Loading door not closed.
Close the loading door (a click should be
heard).
Program does not start. Start button not pressed. Press the Start button.
Water does not enter the machine
or detergent is not washed away. Water tap not turned on. Turn on water tap. Water does not enter the machine
or detergent is not washed away.
Supply hose kinked or trapped. Eliminate the cause.
Strainer in supply hose clogged. Clean the strainer (refer to Page 22).
Water cannot be seen in drum. This is not a fault.
The water lies below the visible part of the drum.
Water is not completely drained. Loose debris is blocking the pump. Clean the pump (refer to Page 20). Water is not completely drained.
LintĆproducing laundry was washed at a high
temperature. The water drainage pipe or drain
hose is blocked. Clean the water drainage pipe and/or drain
hose.
Water is flowing out from
underneath the machine. The thread of the supply hose is not tight. Tighten the thread. Water is flowing out from
underneath the machine.
Leak in the drain hose. Replace the drain hose.