Kuryakyn 7610 KINETIC MINI BOARDS with ADAPTER - Manual (Page 2)

PAGE
2
PRE-INSTALLATION CONSIDERATIONS:
The Kinetic Mini Boards were designed to be used in many different locations on a variety of mo-
torcycles. These installation instructions contain specific mounting procedures as well as general
guidelines for comfortable and safe installation of the boards.
Driver footboard applications: Ensure that the installation of the boards does not prohibit the
proper function of the gear shifter or rear brake pedal. You may only be able to use the middle or
front mounting hole to keep the board from extending too far forward thereby reducing gear
shifter or brake pedal clearance.
Passenger footboard applications: The boards can be installed so that they fold up in the stow
position. Ensure that, when folded back, the boards do not contact any part of the motorcycle and
that they remain in the stowed position during operation of the bike.
INSTALL THE KINETIC MINI BOARDS:
NOTE: Refer to PIC 1. Determine the clutch-side (left)
board from the brake-side (right) BEFORE installa-
tion.
STEP 3 Refer to PIC 2. Install the clutch-side (left) Kinetic Mini Board using any spacers or
washers removed in
STEP 2 . Ensure that the Kinetic Board is able to fold upward and
rearward.
STEP 4 Secure the Board to the clevis with the hardware removed in STEP 2 .
STEP 5 Repeat STEPS 2 through 4 for the brake-side (right).
KINETIC MINI BOARDS with ADAPTER INSTALLATION
-cont.-
THE BOARDS MUST BE INSTALLED SO THEY WILL FOLD UPWARD
AND REARWARD IF THEY COME IN CONTACT WITH ANY OBJECT.
FAILURE TO INSTALL AND ADJUST THE BOARDS TO OPERATE IN
THIS MANNER CAN RESULT IN A LOSS OF
CONTROL WHICH CAN RESULT IN SERIOUS
INJURY OR DEATH.
CLUTCH-SIDE (LEFT) BRAKE-SIDE (RIGHT)
FRONT OF BIKE
PIC 1
Use your best judgment when installing the
Boards. They were designed to fit many differ-
ent bikes and as a result all mounting posi-
tions may not be possible on your specific
model of bike.
CLEVIS
ADAPTER
ALIGN THE BOARD ADAPTER WITH THE
HOLE IN THE CLEVIS.
PIC 2
INSTALLING THE BOARDS IN A WAY THAT INHIBITS THE PROPER
FUNCTION OF THE MOTORCYCLE CAN RESULT IN A LOSS OF CON-
TROL WHICH CAN RESULT IN SERIOUS INJURY OR DEATH.