Fixed mounts for multi-purpose backrest, Installation – Kuryakyn 1659 FIXED MOUNTS FOR MULTI-PURPOSE BACKREST User Manual

Page 3

PAGE

STEP 10

Insert one of the included 1/4”-20 X 7/8” Button Socket Cap Screws through an included .33” ID
Flat Washer. Set the screw with washer within arms reach of your work area.

STEP 11

Slide one of the included Thick Washers between the saddlebag bracket and Fixed Mount. Align
the Thick Washer with the UPPER hole in the saddlebag bracket. FIG 1

STEP 12

Insert the 1/4”-20 screw with washer (from STEP 10) through the UPPER hole, Thick Washer
and Fixed Mount as shown in FIG 1 below. Secure it with one of the included 1/4”-20 Lock Nuts.
FIG 1 Leave loose for now.

STEP 13

Insert one of the 3/8”-16 X 1-1/8” Button Socket Cap Screws through one of the Thick Washers.
Set the screw with washer within arms reach of your work area.

STEP 14

Slide one of the included Thick Washers between the saddlebag bracket and Fixed Mount. Align
the Thick Washer with the REAR hole in the Fixed Mount. FIG 1

STEP 15

Insert the 3/8” screw with washer through the slot in the saddlebag bracket, Thick Washer and
Fixed Mount. FIG 1

STEP 16

Secure with the 3/8” screw with washer with one of the included 3/8”-16 Nylock Nuts. FIG 1.
Tighten all of the hardware.

STEP 17

Repeat

STEPS 4 through 16 for the clutch-side (left).

FIXED MOUNTS FOR MULTI-PURPOSE BACKREST

INSTALLATION

-cont.-

BRAKE-SIDE (RIGHT) SHOWN

FIG 1

FRONT OF
BIKE

UPPER

HOLE

REAR

HOLE

10-24
SCREW

1/4”-20
SCREW

3/8”-16
SCREW

FIX

LEB

LOWER

HOLE

1/4”-20 LOCK NUT

3/8”-16 NYLOCK NUT

THICK
WASHERS