beautypg.com

Kuryakyn 7125 BAHN LOWER FORK ACCENT for VICTORY User Manual

Installation, Bahn lower fork accent for victory, Ryakyn

background image

THANK YOU FOR CHOOSING K

ϋ

RYAKYN!

PROTECT YOURSELF AND OTHERS FROM POSSIBLE INJURY AND/OR PROPERTY

DAMAGE OR LOSS. PAY CLOSE ATTENTION TO ALL INSTRUCTIONS, WARNINGS,

CAUTIONS, AND NOTICES REGARDING THE INSTALLATION, USE, AND CARE OF
THIS PRODUCT.


MAKE SURE THE FOLLOWING PARTS HAVE BEEN INCLUDED IN THE KIT:

2 BAHN

Fork

Accent

2

Alcohol

Pads

1

Installation

Instructions

TOOLS SUGGESTED

Masking tape and marker




STEP 1

Read and understand all steps in the instructions before starting the installation.
Park the motorcycle on a hard, level surface and turn off the ignition.





INSTALLATION

CUSTOMER SERVICE

877.370.3604 (toll free)

INSTALLATION QUESTIONS

[email protected]

or call 715.247.2983

LIMITED WARRANTY

Küryakyn warrants that any Küryakyn products

sold hereunder, shall be free of defects in

materials and workmanship for a period of one

(1) year from the date of purchase by the

consumer excepting the following provisions:

Küryakyn shall have no obligation in the event

the customer is unable to provide a receipt

showing the date the customer purchased the

product(s).

The product must be properly installed,

maintained and operated under

normal conditions.

Küryakyn makes no warranty, expressed or

implied, with respect to any gold plated

products.

Küryakyn shall not be liable for any

consequential and incidental damages, including

labor and paint, resulting from failure of a

Küryakyn product, failure to deliver, delay in

delivery, delivery in nonconforming condition, or

for any breech of contract or duty between

Küryakyn and a customer.

Küryakyn products are often intended for use in

specific applications. Küryakyn makes no

warranty if a Küryakyn product is used in

applications other than intended.

Küryakyn electrical products are warranted for

one (1) year from the date of purchase by the

consumer. L.E.D.’S contained in components of

Küryakyn products will be warranted for defects

in materials and workmanship for 3 years from

the date of purchase where as all other

components shall be warranted for one(1) year.

This includes, but is not limited to; control

modules, wiring, chrome & other components.

Küryakyn makes no warranty of any kind in

regard to other manufacturer¹s products

distributed by Küryakyn. Küryakyn will pass on

all warranties made by the manufacturer and

where possible, will expedite the claim on behalf

of the customer, but ultimately, responsibility for

disposition of the warranty claim lies

with the manufacturer.

ABOUT OUR CATALOG

For purchasing Küryakyn® products, you

can receive a complete catalog free of charge.

Send the Proof-of-Purchase below with

your address to: Küryakyn, P.O. Box 339,

Somerset, WI 54025.

Please indicate either Accessories Catalog for

Harley-Davidson® or GL & Metric Cruisers.

Be sure to ask your local dealer about other

Küryakyn® products, the motorcycle parts and

accessories designed for riders by riders.

©2005 Küryakyn USA® All Rights

reserved.

BAHN LOWER FORK ACCENT for VICTORY

7125-21MC-1013

-cont.-

THIS INDICATION ALERTS YOU TO THE FACT THAT
IGNORING THE CONTENTS DESCRIBED HEREIN CAN

RESULT IN POTENTIAL DEATH OR SERIOUS INJURY.

This indication alerts you to the fact that ignoring the
contents described herein may negatively affect product
performance and functionality or damage the product itself
or the product to which it is being attached.

This indication alerts you to the fact that ignoring
the contents described herein can result in minor or

moderate potential injury.

7125

This copy of installation instructions contains important infor-
mation. Ensure that the end user receives this copy and is
aware of its importance for future reference.

Ensure the area of installation is free of grease, oil, dirt or
other debris including wax/polish products and bugs to en-
sure proper adhesion. Küryakyn WILL NOT issue a warranty
on any parts lost due to improper installation.

The adhesive will not bond correctly if applied at tempera-
tures less than 50°F. Do not attempt this installation in tem-
peratures less than 50°F.