BOXLIGHT XD-15c - Manual (Page 26)

Maintenance 22
BOXLIGHT XD-15c User’s Guide
Caution
To reduce the risk of severe burns, allow the projector to cool for at least 45
minutes before replacing the lamp.
To reduce the risk of injuries to fingers and damage to internal components,
use caution when removing lamp glass that has shattered into sharp pieces.
Please call BOXLIGHT Technial Support if your lamp has exploded.
To reduce the risk of injuries to fingers and/or decreasing image quality by
touching the lens, do not touch the empty lamp compartment when the
lamp is removed.
This lamp contains mercury. Consult your local hazardous waste regulations
to dispose of this lamp in a proper manner.
Resetting Lamp Hours
If you replace the lamp after 1500 hours of operation, please follow the instructions
below within 10 minutes of power on.
OSD FUNCTION
Press the Exit button on the projector for 3
seconds to display the total used lamp time.
• Press the MENU button on the projector
during the lamp hour message. An
adjustment message will appear.
• Press W or X to rest lamp hours or press
EXIT to leave.