Kuryakyn 6391 CRUISE-MATE MOTORCYCLE THROTTLE CRUISE ASSIST User Manual
Page 2
23 Cedarhill Rd.
Bellingham, MA 02019
877-642-3722
COMPLETE INSTALLATION VIDEO AVAILABLE AT WWW.CRUISE-MATE.COM
Figure 1; Insert 5/32 shim
Figure 2; remove friction shoe.
Figure 3; remove "C" clip.
Fig 4; Attach drill jig to lower half of switch housing
Fig 5; Place plastic bushing
into housing.
Fig 6; Drill housing
Fig 7; Tap housing to 3/8-24
Fig 8; Install stop pin.
Figure 9 ; brake housing notch and
switch housing tab
Fig 10; Screw Cruise-Mate
cartridge into housing.
Fig 11; Install handle, handle
spring and shoulder screw.
Drill jig assembly.
Cruise-Mate is intended to enable you to reduce the amount of pressure required to hold throttle open, under no condition do we
recommend removing your hands from the handlebar while the motorcycle is moving.