Kuryakyn 8931 PLUG-N-GO DRIVERS BACKREST for GL 1800 - Manual

THANK YOU FOR CHOOSING K ϋ RYAKYN!
PROTECT YOURSELF AND OTHERS FROM POSSIBLE INJURY AND/OR PROPERTY
DAMAGE OR LOSS. PAY CLOSE ATTENTION TO ALL INSTRUCTIONS, WARNINGS,
CAUTIONS, AND NOTICES REGARDING THE INSTALLATION, USE, AND CARE OF
THIS PRODUCT.
MAKE SURE THE FOLLOWING PARTS HAVE BEEN INCLUDED IN THE KIT:
1 Plug-N-Go Drivers Backrest with Pouch
1 Backrest Receiver
1 Support Bracket
1 Hardware Kit Containing:
1 Rain Flap
1 Chrome Top Trim
6 M3 X .05 X 12mm Flat Socket Cap Screws
2 M3 X .05 X 12mm Button Socket Cap Screws
2 3.7mm ID Flat Washers
3 M6 X 1.0 X 25mm Button Socket Cap Screws
3 M6 Flat Washers
1 Adhesive Foam Strip
1 Installation Instructions
TOOLS SUGGESTED
Set of Metric Hex Wrenches, Set of Metric Sockets and Ratchet, Sharp Serrated Blade Knife, Razor
Blade, Straight Edge (Yard Stick), Drill and Drill Bits, Non-Permanent Marker, Small Diameter Punch
STEP 1
Read and understand all steps in the instructions before starting the installation.
Park the motorcycle on a hard, level surface and turn off the ignition.
STEP 2 Remove the seat from the motorcycle.
INSTALLATION
CUSTOMER SERVICE
877.370.3604 (toll free)
INSTALLATION QUESTIONS
[email protected]
or call 715.247.2983
LIMITED WARRANTY
Küryakyn warrants that any Küryakyn products
sold hereunder, shall be free of defects in
materials and workmanship for a period of one
(1) year from the date of purchase by the
consumer excepting the following provisions:
● Küryakyn shall have no obligation in the event
the customer is unable to provide a receipt
showing the date the customer purchased the
product(s).
● The product must be properly installed,
maintained and operated under
normal conditions.
● Küryakyn makes no warranty, expressed or
implied, with respect to any gold plated
products.
● Küryakyn shall not be liable for any
consequential and incidental damages, including
labor and paint, resulting from failure of a
Küryakyn product, failure to deliver, delay in
delivery, delivery in nonconforming condition, or
for any breech of contract or duty between
Küryakyn and a customer.
● Küryakyn products are often intended for use in
specific applications. Küryakyn makes no
warranty if a Küryakyn product is used in
applications other than intended.
● Küryakyn electrical products are warranted for
one (1) year from the date of purchase by the
consumer. L.E.D.’S contained in components of
Küryakyn products will be warranted for defects
in materials and workmanship for 3 years from
the date of purchase where as all other
components shall be warranted for one(1) year.
This includes, but is not limited to; control
modules, wiring, chrome & other components.
● Küryakyn makes no warranty of any kind in
regard to other manufacturer¹s products
distributed by Küryakyn. Küryakyn will pass on
all warranties made by the manufacturer and
where possible, will expedite the claim on behalf
of the customer, but ultimately, responsibility for
disposition of the warranty claim lies
with the manufacturer.
ABOUT OUR CATALOG
For purchasing Küryakyn® products, you
can receive a complete catalog free of charge.
Send the Proof-of-Purchase below with
your address to: Küryakyn, P.O. Box 339,
Somerset, WI 54025.
Please indicate either Accessories Catalog for
Harley-Davidson® or GL & Metric Cruisers.
Be sure to ask your local dealer about other
Küryakyn® products, the motorcycle parts and
accessories designed for riders by riders.
©2005 Küryakyn USA® All Rights
reserved.
PLUG-N-GO DRIVERS BACKREST for GL 1800 8931
8931-23GL-0614
-cont.-
THIS INDICATION ALERTS YOU TO THE FACT THAT
IGNORING THE CONTENTS DESCRIBED HEREIN CAN
RESULT IN POTENTIAL DEATH OR SERIOUS INJURY.
This indication alerts you to the fact that ignoring the
contents described herein may negatively affect product
performance and functionality or damage the product itself
or the product to which it is being attached.
This indication alerts you to the fact that ignoring
the contents described herein can result in minor or
moderate potential injury.
If installing this product for another party, please make
sure they receive this copy of the installation instructions
so they are aware of the important information contained
in them.
Installation of this product requires PERMANENT
ALTERATION of the motorcycle seat.
Kuryakyn P/N 8391 PLUG-N-GO DRIVERS BACKREST for
GL1800 will ONLY fit STOCK Honda Goldwing seats.