Ride on, Bahn shift arm for touring/trike, Installation – Kuryakyn 1096 BAHN SHIFT ARM FOR TOURING/TRIKE User Manual
Page 3

PAGE
3
STEP 10
Secure the shift lever assembly (so it does not shift the bike into gear) and tighten the nut on the
back side of the BAHN Shift Arm.
STEP 11
Remove and discard the tape.
STEP 12
Reinstall the main fuse.
STEP 13
Ensure that the entire shifter mechanism functions properly and does not interfere with the safe
operation of the motorcycle BEFORE start-up.
BAHN SHIFT ARM FOR TOURING/TRIKE
Ride On!
INSTALLATION
TIPS FOR PROPER CARE:
Your new BAHN product is made out of anodized aluminum. Anodized aluminum requires special at-
tention when cleaning. Some cleaning products or procedures can actually remove the anodized
treatment which will lead to pitting in the aluminum.
Thoroughly clean the BAHN product often with a soft cloth, mild soap and water. Regular cleaning
keeps contaminates from building up.
Rinse thoroughly with FRESH water.
Use only metal protection products that are formulated for anodized aluminum.
DO NOT USE bleach or chlorides to clean the BAHN product.
DO NOT USE products containing abrasives to clean the BAHN product. Never use steel or brass
wool, wire brushes, polishing wheels, rubbing or polishing compounds on the BAHN product.
DO NOT USE concentrated alkaline based solutions to clean the BAHN product. Many detergents are
alkaline based.
It is the end user’s responsibility to ensure that all of the fasteners
(including pre-assembled) are tightened before operation of the motorcy-
cle. Küryakyn will not provide warranty coverage on products or compo-
nents lost due to improper installation or lack of maintenance. Periodic in-
spection and maintenance are required on all fasteners.
DURING THE INSTALLATION OF THIS PRODUCT, THE VEHICLE MAY
BE SHIFTED INTO GEAR. STARTING THE VEHICLE WHILE IN GEAR
CAN CAUSE SUDDEN VEHICLE MOVEMENT RESULTING IN SERIOUS
INJURY OR DEATH. ENSURE THE VEHICLE IS NOT IN GEAR BEFORE
START-UP.
If further shifter adjustment is necessary, consult the service manual for
your specific model of motorcycle.