Kuryakyn 1667 FIXED MOUNTS FOR MULTI-PURPOSE BACKREST - Manual (Page 3)

PAGE
3
STEP 7
Check the operation of the Backrest by folding the locking levers (PIC 9)
to the straight out position. Lower or raise the backrest to the desired
location. Fold the locking levers over to lock them in place. Gently rock
the Backrest back and forth to ensure the locking pins are engaged in the
notches in the Fixed Mounts. Repeat for the other position of the
Backrest. Visually inspect the Shoulder Washers and Countersunk
Socket Head Cap Screws at the pivot point for any signs of
loosening before each ride. Küryakyn requires checking all
backrest attaching fasteners to the torque specifications defined
in these instructions every 3,000 to 5,000 miles.
NOTE: See instructions for Multi-Purpose Driver/Passenger Backrest,
P/N 1660 or P/N 1661, for adjustment procedures.
THIS BACKREST IS NOT DESIGNED AS A SAFETY
RESTRAINING DEVICE. FAILURE TO HOLD ONTO THE
MOTORCYCLE MAY RESULT IN SERIOUS INJURY OR
DEATH.
Ensure that the installation of this product does
not interfere with the proper operation of the
motorcycle before riding.
It is the installer’s responsibility to ensure that all of the
fasteners (including pre-assembled) are tightened per these
instructions before operation of the motorcycle. Küryakyn will not provide
warranty coverage on products or components lost due to improper installation or
lack of maintenance. Visually inspect the Shoulder Washers and Countersunk
Socket Head Cap Screws for any signs of loosening before each ride. Küryakyn
requires checking all Backrest attaching fasteners to the torque specifications
defined in these instructions every 3,000 to 5,000 miles.
Ride On!
FIXED MOUNTS
INSTALLATION
PIC 5
SHOULDER
WASHER
COUNTERSUNK SOCKET
HEAD CAP SCREW
PIC 6
APPLY TREADLOCKER
TO SCREW
PIC 7 UNLOCKED
LOCKED
LOCKING LEVERS