BT 900 - Manual (Page 15)

To dial a quickdial number
This dials from the quickdial memory,
SHARED
or PERSONAL, which is currently selected.
• Press the TALK button.
• Press the QUICKDIAL button.
• Press the location 0-9 where the quickdial
number you want is stored. The number is
dialled.
Or
To view then dial a quickdial number
You can display the number before dialling.
• Press the QUICKDIAL button.
• Display shows the first location and the
number stored.
• Press the ➔ button to scroll through the
quickdial list until you display the number
you want.
• Press the TALK button. The number is dialled.
12
You can scroll through the quickdial numbers
and see any available locations. You can then
change or add a number.
To View or edit a quickdial memory number
First, confirm that the handset is searching in the
correct memory (ie.
SHARED or PERSONAL), if it
is not, change it by following the steps on page 11.
• Press and release the QUICKDIAL button.
• Display shows the first quickdial location plus
the number stored under that location.
• Press the ➔ button several times to move
to the stored number that you want to view
or edit.
• To edit press the QUICKDIAL button for a few
seconds until a beep is heard.
• Press the ✗ button to delete the existing
digits from the right. When the memory is
empty, key in the new number.
• Press the ✔ button to store the new number.
The display shows STORED and the handset
beeps.
Quickdial
Press the
✗
button to reverse one step of the
instructions. Or press it and hold for 2 seconds
to revert quickly to standby.
Quickdial
Quickdial
0-9