Kinetik Blood Pressure BPM1C - Manual (Page 10)

Using your Blood Pressure Monitor
Memory
The memory can store 60 sets of measurements. The results will be automatically stored.
To check the last result, press “Memory” when the monitor is switched on and the most
recently stored result will be displayed.
Press “Memory” continuously to display the previously stored measurements one by one.
Once the memory has been filled with 60 sets of data, the 61th measurement when taken
will be stored as the most recent reading whilst the first reading you took will be automatically
deleted.
To delete a stored result, press “Memory” until the desired result is displayed. When desired
result is displayed on screen, hold down “Memory” for 3 seconds. The display will now show
“dL” until you release the button. Once the button is released, that result will be deleted.
9