Specifications – KD Scientific EZFLOW 2010 User Manual
Page 4

3
Specifications
Protection against electric shock
Type BF
Mode of operation
Continuous
Degree of protection against
ingress of fluids
Drip-Proof IPX1
Acceptable syringe sizes
20/30 ml, 50/60 ml, 100 ml
Flow-rate ranges
0.1 ml/hr - 300 ml/hr in 0.1 ml/hr increments
Infusion accuracy
Check
±2.5%
Operating temperature
41˚F - 104˚F (5 - 40˚C)
Relative Humidity
80% max.
Power requirements (110V version)
110VAC±10% 60 Hz 25VA or 12VDC±5%
Power requirements (220V version)
220VAC±10% 50 Hz 25VA or 12VDC±5%
Dimensions
Approx. 13” X 5.5” X 3.5”
(335 X 142 X 120 mm)
Weight
5.5 pounds (2.5 kg)
Battery operation at a flow rate of 50 ml/hr, assuming fully charged battery: 4 hours
SYRINGE FLOW RATES
Syringe Size (ml)
Flow Rate (ml/hr)
20/30
0.1 - 150
50/60
0.1 - 300
100
0.1 - 300
This Micro-Infusion Syringe Pump uses a precision motor for injections desired
fluids. Other features include:
• Self-Test, Self-Diagnoses when the pump is turned on the first time
• Audible and Visual Alarms of “Near Empty”, “Complete”, “Occlusion” and “Low Batt”
• Wide range of compatible syringe: 20 ml, 30 ml, 50 ml, 60 ml, 100 ml
• Wide flow rate range: 0.1 ml/hr - 300 ml/hr in 0.1ml/hr increments
• Waterproof ergonomic touch control panel
KDS EZFlow 2010/2011