KD Scientific EZFLOW 2020 - Manual (Page 4)

3
KDS EZFlow 2020/2021
Specifications
Protection against electric shock Type BF
Mode of operation Continuous
Degree of protection against
ingress of fluids Drip-Proof IPX1
Acceptable syringe sizes 20 ml, 50/60 ml, 100 ml
Pre-set infusion times 4, 8, 12, 16 and 20 minutes
Accuracy ± 20 seconds
Operating temperature 41˚F - 104˚F (5 - 40˚C)
Relative Humidity 80% max.
Power requirements 120VAC 60 Hz 6VA
Ambient temperature 5˚- 40˚C (41˚F - 104˚F)
Dimensions 13” X 4.5” X 4.5”
Weight 4.4 pounds (2 kg)
Battery operation at a flow
rate of 50 ml/hr, assuming fully
charged battery 4 hours
This Micro-Infusion Syringe Pump uses a precision motor for injections of desired
fluids.
• Audible and Visual Alarms of “Near Empty”, “Complete”, “Occlusion” and “Low Batt”
• Wide range of compatible syringe: 20 ml, 50/60ml, 100ml
• Waterproof ergonomic touch control panel
Parts and Accessories
Order # Model Product
78-0560 EZFlow 2020 EZFlow Syringe Driver Pump, 110 VAC
78-1560 EZFlow 2021 EZFlow Syringe Driver Pump, 220 VAC
78-0561 IV Pole Mount