KD Scientific 310 - Manual (Page 7)

5
KDS Model 310 Plus Series
Keypad Functions
(continued)
select This key has three functions:
a. Return to main menu when pressed repeatedly
b. Selects the pulsing or "highlighted" feature of the main menu display.
c. Enter numerical values.
run/stop
a. Turns the motor on and off.
b. Acts as a "pause" during a dispense.
DISPLAY
After the pump is programmed an arrow on the right side of the display indicates the
direction of operation. This arrow pulses when the pump is running.
Operating Instructions
POWER SWITCH
The power switch is located at the right, rear corner of the pump. When the power is turned
on the LCD will display the Volume or Rate setting. Press the select key to return to the main
menu.
MAIN MENU
Pressing select repeatedly will always return the display to the main menu. The main menu
consists of five variables, three of which are displayed at all times. The center variable pulses
to indicate that this option can be reviewed or changed. The menu acts as a continuous loop
and the arrow keys, are used to move around the loop. The variable to be changed
can be selected with the select key.
pwr up table dia rate vol inf wdrw
run/stop syr dia direct entry flowrate dispense vol infuse withdraw
mfr, size syr dia (mm) µl/h µl
➔
➔
➔
➔
➔
➔
➔
➔
➔
➔
➔
➔
➔
➔
➔
➔
➔
➔