JUMO PC Audit Trail Manager Software PCAT (B 70.9704.0) - Manual (Page 10)

2 PC Audit Trail Manager Software
10
2.2 Minimum configuration
The following hardware and software requirements have to be met for
installing and operating the PCAT software:
- IBM-PC or compatible PC with Pentium
1
processor or higher
- 64MByte main memory
- CD drive
- mouse
- one free serial interface or network connection, or CompactFlash memory
cards (depending on the type of data transmission to the paperless
recorder)
- 120MByte available on hard disk
- Microsoft Windows
2
NT4.0, 2000 or XP
In addition, the following items are required for communication between the
PC and the recorder, such as:
- reader/writer for CompactFlash memory card or
- PC interface cable including adapter (only when using the Setup interface)
or
- serial interface cable (when using the RS232C or RS422/485 interface) or
- network connection (when using the Ethernet connection).
Recommended
configuration - Pentium III
- Windows 2000
- 128MByte main memory
- 2GByte free space on hard disk for data
1. Pentium is a registered trademark of the Intel Corporation
2. Microsoft and Windows are registered trademarks
of Microsoft Corporation