Bosch GSM 509 - Manual (Page 15)

Enter the Setup menu by pressing »MENU«
Select »SMS setup«
With the SMS setup menu you can set up the
necessary features for sending point-to-point
messages and for receiving broadcast messages.
These are your options:
»Send SMS setup«
»Broadcast setup«
»Delete SMS«
Send SMS setup
This is the sub menu to enter if you want to set
up the parameters for sending an SMS point-
to-point message. You have two options:
»Service centre«
»Reply path«
Service centre
Your telephone will guide you through the
parameters that you have to set up:
* Accept to add a service centre by pressing
»OK«.
* Enter your network operator’s phone
number for this special service (remember
to add "+" and national code before the
number). Confirm by pressing »OK«.
* Enter the name of your network operator
and press »OK«.
* Some network operators have already
entered their own name and telephone
number; in that case you just have to select it
by pressing »OK«.
You will now have different options of
specifying a validity time. This is the period
of time that the message will remain with
your network operator if for some reason it
cannot be delivered at once. Confirm your
choice by pressing »OK«.
You will now be asked to specify the kind
of teleservice you want. Select »Text« and
press »OK«.
The menu now returns to »Service centre«.
Press »SELECT« and then »OK«.
Now the name and the number of the service
centre that you have set up will be
displayed. Press »SELECT«.
Once a service centre has been selected, these
parameters will automatically be used for
sending all future messages through this service
centre.
Having stored a service centre number, you
have the option of adding a new service centre,
deleting a stored service centre or editing a
stored service centre. (The option of storing
more than one service centre may not be
available with all SIM cards).
Reply path
For messages that have to be sent via several
service centres to reach the recipient, some net-
works offer the feature of sending a reply, if
any, back to you through the same chain of
service centres. This is called a reply path and
you can select whether you want it to be on or
off.
See the following page
1
2
4
3
5
6
7
Setup menu
Phone setup (Menu 3)
Setup menu
SMS setup (Menu 4)
Enter the setup menu by pressing »MENU«
Select »Phone setup»
Speed dialling
If you turn on the speed dialling function, it is
possible to make calls to any number stored in
the phone book more easily by using the
location number (up to 3 digits). You will then
just have to press the location number for one
second (if the location number consists of more
than 1 digit, press the first digit(s) and hold the
last digit for one second). The call will then be
automatically initiated. Further, this function
gives you a shortcut to your last outgoing call:
Press 0 (zero) for one second and the call will
be initiated automatically.
Any key answer
If you turn on this function you can answer an
incoming call by pressing any key you like
except for the left function key and the arrow
keys.
Factory settings
This option brings you back to the original
setup of your phone. The phone is set up by
the manufacturer as follows:
Language: Automatic
Autoredial: Off
Network: Automatic selection
Power saving:
Display: Remains on
Backlight: Switches off
Car kit:
Auto answer: Off
Power off: Automatic
Greeting: Welcome
Speed dialling: On
Any key answer: Off
26 27
First First
Continues
509 DUAL GB 02/09/99 15:12 Side 26 (Sort plade)