Cleaning / repairing the unit, Cleaning / repairing the unit 90, Caution – JULABO FP51-SL Ultra-Low Refrigerated Circulators User Manual
Page 90: Prevent humidity from entering into the circulator
Cleaning / repairing the unit
90
15. Cleaning / repairing the unit
Caution:
Always turn off the unit and disconnect the mains cable from the power source
before cleaning the unit.
Prevent humidity from entering into the circulator.
Electrical connections and any other work must be performed by qualified
personnel only.
FP51
SL
Sollwert 165.5°C
ExternIst: 124.7°C
Leistung: 50 %
Regelung: intern
T
ESC
F
3
6
9
0
2
5
8
1
4
7
°C
°C
16
0
24
0
32
0
0
8
0
4
0
In dusty environments, the refrigerating machine’s condenser
should be cleaned by vacuuming every 1 to 2 months. The
condenser is located behind the venting grid on the front of the unit,
which can be taken off by removing the screws.
Switch off the unit, disconnect mains power cable.
Remove the venting grid.
Clean the ribbed condenser with a vacuum cleaner.
Replace the venting grid.
Switch on the unit.
Cleaning:
For cleaning the bath tank and the immersed parts of the circulator, use low surface
tension water (e.g., soap suds).
Clean the outside of the unit using a wet cloth and low surface tension water.
The circulator is designed for continuous operation under normal conditions. Periodic
maintenance is not required.
The tank should be filled only with a bath fluid recommended by JULABO. To avoid
contamination, it is essential to change the bath fluid from time to time.
Repairs
Before asking for a service technician or returning a JULABO instrument for
repair, please contact an authorized JULABO service station.
When returning the unit:
Clean the unit in order to avoid any harm to the service personnel.
Attach a short fault description.
During transport the unit has to stand upright. Mark the packing correspondingly.
When returning a unit, take care of careful and adequate packing.
JULABO is not responsible for damages that might occur from insufficient
packing.
JULABO reserves the right to carry out technical modifications with repairs for
providing improved performance of a unit.