JULABO AWC100 Compact Recirculating Cooler - Manual (Page 4)

Intended use
4
1. Intended use
JULABO recirculating coolers have been designed for temperature application to specific
fluids. The pump connections can be used for cooling applications in an external circuit at a
constant temperature.
JULABO water baths are not suitable for direct temperature control of foods,
semi-luxury foods and tobacco, or pharmaceutical and medical products.
Direct temperature control means unprotected contact of the object with the
bath medium (bath fluid).
1.1. Description
The AWC 100 recirculating cooler is suitable for the cooling of water in loop circuits. A
pump supplies the cooling water to the external circuit via the cooling water outlet. The
recirculating cooler constantly withdraws heat from the circulating fluid. The water
temperature varies with the ambient temperature and may not exceed 40 °C.
2. Operator responsibility – Safety instructions
The products of JULABO ensure safe operation when installed, operated, and maintained
according to common safety regulations. This section explains the potential dangers that
may arise when operating the circulator and also specifies the most important safety
precautions to preclude these dangers as far as possible.
The operator is responsible for the qualification of the personnel operating the units.
 The personnel operating the units should be regularly instructed about the dangers
involved with their job activities as well as measures to avert these dangers.
 Make sure all persons tasked with operating, installing, and maintaining the unit have
read and understand the safety information and operating instructions.
 When using hazardous materials or materials that could become hazardous, the unit
may be operated only by persons who are absolutely familiar with these materials and
the unit. These persons must be fully aware of possible risks.