JULABO AWC100 Compact Recirculating Cooler - Manual (Page 10)

Safety notes for the user
10
3.3. Safety instructions
Follow the safety recommendations to prevent damage to persons or
property. Further, the valid safety instructions for working places must be
followed.
 Only connect the unit to a power socket with earthing contact (PE –
protective earth)!
 The power supply plug serves as a safe disconnecting device from the
line and must always be easily accessible.
 Place the instrument on an even surface on a pad made of non-
inflammable material.
 The instrument is not suited for unsupervised continuous operation.
 Do not stay in the area below the unit.
 Make sure you read and understand all instructions and safety
precautions listed in this manual before installing or operating your unit.
 Never operate the unit without bath fluid in the bath.
 Do not drain the bath fluid while it is hot or cold!
 Use suitable connecting tubing.
 Avoid sharp bends in the tubing, and maintain a sufficient distance from
surrounding walls.
 Make sure that the tubing is securely attached.
 Regularly check the tubing for material defects (e.g., for cracks).
 Never operate damaged or leaking equipment.
 Always turn off the unit and disconnect the mains cable from the power
source before performing any service or maintenance procedures, or
before moving the unit.
 Always turn off the unit and disconnect the mains cable from the power
source before cleaning the unit.
 Always empty the bath before moving the unit.
 Transport the unit with care.
 Sudden jolts or drops may cause damage in the interior of the unit.
 Observe all warning labels.
 Never remove warning labels.
 Never operate equipment with damaged mains power cables.
 Repairs are to be carried out only by qualified service personnel.