Jabra SUPREME - Manual (Page 7)

6
english
Jabra SUPrEME
Pair new
device
PAIRInG It WItH YoUR PHone/deVICe
bluetooth® Headsets are connected to mobile phones/devices
using a procedure called ‘pairing’ . by following a few simple steps, a
phone/device can be paired with a headset in a matter of seconds .
1 activate bluetooth® on your phone/device
2 Turn the Jabra SUPrEME on
3 The first time you turn the Jabra SUPrEME on it will
automatically enter into pairing mode . The connectivity icon
on the Status display will flash with a blue light and you will be
voice guided through the pairing process .
If you have disabled the Voice guidance go to the bluetooth
settings menu on your phone/device and search for new
bluetooth devices . Choose Jabra SUPrEME . When pairing is
complete Status display will shift from flashing to steady light .
You are now ready to start using your Jabra SUPrEME .
NOTE: If asked for a passkey or pin code use 0000 (four zeros)
PAIR A neW oR seCond deVICe
1 Ensure that the Jabra SUPrEME is turned on
2 Tap the Voice button . You will be asked to ”Say a command”
3 Say ”Pair new device” and follow the instructions
4 If this is your second device you will need to reconnect to the
first device afterwards